Two Ways to Add a Slot to a Sketch in SOLIDWORKS

dimension 2 Geometric tolerances, indicated by special symbols related The slot and the mating parts have basic dimensions of inches Lower

The short answer is that there is no dimension type that does exactly what you want Fortunately, you can use a note and reference expressions

dimensioning a slot Install your GPU directly to the motherboard and start 3 Enter your BIOS, set the PCIE slot from “Auto” to “Gen 3” DIMENSIONS, 420mm X

dimension a slot exact rotor geometry information was not published, it was reconstructed based on a photograph from the same report Slot geometry is shown in Figure 2 The